ID # 17415878

FLOE Roll-In Docks

Videos
Call for Price
Overview

Dock Structure

The Bridge-Type Truss design of FLOE’s Roll-In docks provide the highest strength-to-weight ratio available. A clean, sharp appearance is achieved by welding the webbing to the inside of the dock. Waves flow through this open design rather than pound against it.

Easy-Level™ Leveling SystemEasy Level RI 300x223

Floe’s rust-resistant, flush mounted Easy-Level™ System allows top side leveling of the lake dock without ever entering the water! All that’s needed is a cordless drill or FLOE’s leveling tool. For a clean, smooth appearance, the adjustment hole is neatly topped off with a flat plastic cap.

 
Quick-Connects™and Easy-Level™ Wheel Kits Make Life a BreezeQuick Connects 2017 300x197

FLOE’S Quick-Connects™ and Easy-Level™ Wheel Kits let you effortlessly connect sections and create endless dock configurations! Because there is no hard bolting, dock sections can be simply moved or added-on to enabling you to adjust to ever-changing needs.

 
Double Braced Easy-Level™ Support LegsFLOE Double Brace Legs

Enjoying lake life is so much simpler and more enjoyable with a safe and solid dock surface. FLOE’s Double Braced Easy-Level™ support legs eliminate unsafe dock sway and provide unrivaled stability. Walking on a FLOE lake dock feels like taking a stroll on a permanently built pier.

FLOE’s Double Braced Easy-Level™ Wheel Kits are available in sizes that can safely accommodate water depths up to 8 1/2 feet.

 

Wheel and Sand Pad ChoicesFLOE Sand Pad Wheel Kit

Choose from Wheels or Sand Pads on FLOE roll-In dock legs.  Wheels make it easy to seasonally install and remove docks.
A drilled wheel works best in firm to moderately soft applications. The drilled wheel fills with water for ballast. An airtight wheel can be used in dense mud applications where the anticipated settling will be greater than 4”. The mud wheel is not drilled and adds buoyancy to ease both installation and removal of your roll-in dock.

 

 
Imagine installing or removing a dock with just one person! Each section of the FLOE dock is equipped with high density polymer wheels so you lift less than half the weight of just one section no matter the length of the dock! Let the good times roll!
Sand pads are used for installations where you leave your dock in year round or where portability is not a concern

https://www.floeintl.com/wp-content/uploads/2018/02/Roll-In-dock-table-1024x397.jpg

 

Specifications
Model
Roll-In Docks
Year
2021
Sale Type
New
Manufacturer
FLOE
accessories
DOCK FURNITUREFLOE Furniture 1 300x200

FLOE’s dock furniture includes 2 sturdy swivel/rocking chairs with foot rest and aluminum table with umbrella hole (umbrella sold separately). This furniture, with its maintenance-free sling fabric and aluminum frame, is great for entertaining and relaxing on the water. Styles and colors of chairs may vary.


 
BENCHESFLOE Gray Alumigrain Benches 1

Benches attach anywhere on the side of the dock and come standard with two armrests with cup holders. Available in Aluma-Grain™ and grey finish.


 
FISHING ROD HOLDER FLOE Dock Accessories Fishing Rod Holder

The fishing rod holder simply slides into the channel on a FLOE vertical bumper.

 
LADDERSWireless remote kit for vertical lifts.

Extra-long vertical grab handles give you leverage for easy dock access without taking up dock space. FLOE swim ladders attach anywhere on the dock. Available in 58″ & 70″ heights.

 
STEPS FLOE Dock Accessories Steps

Dock steps make it as easy to get out of the lake as it is to jump in. The steps have an all-aluminum construction for a lightweight, long-lasting addition to your dock. The accordion-style design comes in three sizes: a four-step, a six-step and an eight-step. These steps will accommodate water depths up to 74″. The extra-deep 12″ steps and handrail make this a great solution for lake users of any age. Available for stationary and roll-in docks.


 
VERTICAL BUMPERS Wireless remote kit for vertical lifts.

The ultimate way to keep scratches off your prized possessions. Available in 30″ and 40″ heights. Recommended every 4′ to 6′ where boats will be parked and for use on corners. Bumpers attach anywhere along the side of the dock and have infinite vertical adjustment. Vertical bumpers are available in aluminum or with FLOE’s exclusive Aluma-Grain™ finish.



 
PREMIUM CORNER BUMPERVertical lifts motor stop photo.

Rivets to the dock frame and protects the dock from all sides.

 
CORNER BUMPERSFLOE Bow Stop

Soft PVC floating dock corner bumper rivets to deck surface and protects your watercraft from the corner of the dock.

 
CLEATSFLOE Dock Accessories Cleat

Heavy duty aluminum cleats are perfect for tying off your boat. Two styles available – one that mounts to the frame of the dock and one that side mounts using a bracket.

 
BUMPER EDGINGVertical lifts wheel kits.

Bumper edging works great along the dock edge and as a bow protector when entering a slip. Bumpers are sold in sets of two 10’ lengths and work for roll-in, stationary and floating docks.

 

HANDRAILS

Vertical lifts Float & Roll systems.Handrails add safety, ease and access to your dock system. 42” high aluminum safety handrails are extra sturdy and have clean, rounded radial corners. Handrails come in 4′, 6′, 8′ and 12′ lengths.

SHORE END WHEELFLOE Dock Accessories Shore End Wheel Kit

Eliminates lifting and makes installation and removal easier then ever! Wheels can be turned to the inside or outside depending on application.

 
SPEED WRENCHSpeed Wrench

Level your dock without getting wet! 4.5’ tall speed-wrench makes leveling your dock a breeze.

 
SUPPORT POSTSFLOE Boat Lift Step

Available for roll-in and stationary docks. FLOE’s support posts with mounting brackets are available in 2 1/2′, 4′, 6′, 8′ and 10′ lengths. Mainly used for shore-end support. Posts can also be used on sundecks in some situations.


 
FLAG POLEFLOE Dock Accessories Flag

 Telescoping pole raises and lowers in seconds with infinite adjustment. Aluminum pole goes through a mounted bracket and augers to the lake bottom.  Includes globe and solar light that shines down on the flag.  3’x5′ flag sold separately.

 
SEAWALL ATTACHMENT Seawall Attachment

Many lake shores have seawalls where shore end ramps are not ideal. The seawall attachment connects a dock section directly to the seawall.

 
CANOE/KAYAK RACK FLOE Accessory Cart

Support bars with PVC tubes makes it easy for one person to pull the canoe onto the rack. The adjustable support poles allow the rack to be placed in water depths up to 42″.

 
LAKE ACCESSORY RACK FLOE Accessory Cart

Single and double tier for holding kayaks, paddleboards and lake mats.  Heavy-duty bungee is connected to each bar to hold items in place.  Double arms are adjustable vertically.  Additional 23″ add-on arms for double rack are also available.  35 lb weight capacity per arm.
LAKE ACCESSORY CARTFLOE Accessory Cart

Adjustable bars to accommodate kayaks, paddle boards and lily pads. The 2” coupler makes for easy transporting of accessories to storage areas.  35 lb. weight capacity per arm.

 

sample layouts

DOCK SIZES AND SAMPLE LAYOUTS

Add aluminum dock sections and components as your needs grow or your budget allows! FLOE has a variety of sizes to choose from to design your perfect roll-in dock system. The options are truly endless. Use our Design A Dock tool to create your custom dock system.

Roll-In Dock sample sections and sun decks.

Roll-In Dock sample wedges and ramps.

Dock Sections/Sundecks
These roll-in sections can be used for going straight out as well as making “L” shapes, slips or sundecks.
Placing two 4′ x 12′ or 4′ x 16′ sections side by side gives you an excellent option for a double-wide sundeck
that are easier to handle than a large sundeck during installation and removal.

Sundecks
A 4′ x 8′ sundeck can be used on the side of a straight section to create an 8′ x 8′ sundeck.
An 8′ x 8′ section used on the side of a straight section creates an 8′ x 12′ sundeck.
8′ x 12′ and 8′ x 16′ sections can be used either at the end of a straight section
or off to the side to create a sundeck.

Wedges
Make that perfect corner while adding safety and beauty to your system.

Shore End Ramps
Adjustable, pivoting shore-end ramps give you the ultimate approach and additional length for less money.

Truss Style Shoreway Ramps
Provides the flexibility of a shore end ramp with the look of a roll-in dock section.
Can be used with or without wheel kits.

 

 

decking choices

Aluminum Dock DeckingAluminum dock decking.

FLOE’s most popular decking! Maintenance-free aluminum decking has a long-lasting, baked on, anti-skid surface. The light-grey hue and open, ribbed underside allows air to move freely and cool the dock surface. The aluminum also assists in keeping the deck cool by conducting and transferring the water temperature to the deck.

Aluma-Grain™ Dock Decking Aluminum dock decking.

Cutting edge paint application technology has allowed us to create a maintenance-free aluminum decking with the look of real wood. This patented powder coating process combines the aesthetics of real wood with all of the great features of our standard aluminum decking.

 

storage and removal

OFF-SEASON STORAGE MADE SIMPLE, EVEN ON A HILLStoring a Roll-In dock.

FLOE’s innovative, modular design gives you versatility not available on any other dock. Easily disconnect dock sections for seasonal storage.

DISCONNECTED Storing a Roll-In dock.

FLOE’s Quick-Connect™ System allows dock sections to come apart quickly for off-season storage. They can be stored side-by-side (as shown above) or they can be nested for more compact storage.

 
CONNECTED Storing a Roll-In dock.

Dock sections can easily be pulled out and stored while still connected for quick and easy installation next spring.
Storing a Roll-In dock.
LARGE SYSTEM? NO PROBLEM! Storing a Roll-In dock.

Large systems can be easily broken down into the modular parts and stored in a small area out of sight.

 

 

dock sections and components

DOCK SECTIONS AND COMPONENTS

FLOE roll-in dock sections are built to last. Custom extruded aluminum and innovative engineering go hand-in-hand to provide our customers with benefits that are unmatched in the industry.Roll-in modular dock sections are available in 8′, 10′, 12′ and 16′ lengths and 2′, 4′ and 6′ widths. FLOE’s maintenance-free aluminum dock systems are manufactured to provide you with a long lasting, trouble-free investment. It may just be the last lake dock you ever buy!

SUNDECKSDJI 0020 New Canopy 300x201

FLOE roll-in sundecks offer you a spacious way to enjoy your time on the water. Many sizes are available to make the perfect dock platform for entertaining family and friends.

SHORE-END DOCK RAMPSShore end ramp component for Roll-In docks.

The perfect approach to your dock, as well as the most cost effective way to add length. The shore-end dock ramp attaches using our exclusive dock hook. It pivots up and down to match any shoreline height and easily detaches for seasonal storage.

SHOREWAY RAMPSShoreWay And Storage 2 260x300

The shoreway ramp has a bridge truss structure to match your roll-in dock sections and can be used with or without wheel kits. With wheels, it can be independently adjusted and moved around like other sections.  Without wheels it stores compactly on top of a roll in dock section.  Shoreways also work well as ramps on floating dock systems.

 
DOCK WEDGESFLOE Wedge Furniture 1 300x266

Increases your deck space while making an attractive, safe corner. Wedges also make a great spot to attach a bench, ladder or furniture. Roll-in wedges come in 2′, 4′ and 6′ widths.

 

 

Videos